Products

Vapor Phase Selection Valve KPF-1 (multipurpose valve)

SpecificationsMeaning
Working mediumHydrocarbon liquefied fuel gas for municipal household consumption in accordance with GOST 20448-2018
Working pressure, no more than 1.6 MPa
Conditional bore 7mm7 mm
Input connection 1.1.1. 3/4” - 14 NPT3/4” - 14 NPT
Output connection885” - 14 NGO-LH-INT (or M22x1.5L)
Operating ambient temperature-40°…+45 °С
Weight, no more than0,95 kg
Reliability indicators – mean time between failures, not less – average service life, not less 10000 cycles; 12 years
Torque of force for screwing the valve into the neck of the cylinder220±40 Nm
The moment of force on the flywheel for hermetically closing the valve4,7Nm
Purpose — to ensure safe selection of the vapor phase of gas from the LPG tank.

External safety valve KPn-2 and check valve (lower) KOn-2

Parameter nameSafety valve KPn-2Check valve KOn-2
Working environmentHydrocarbon liquefied fuel gas for municipal household consumption according to GOST 20448Hydrocarbon liquefied fuel gas for municipal household consumption according to GOST 20448
Working pressure (no more), MPa1,62,5
P op - opening pressure (no more), MPa1,75-
P fo - full opening pressure (no more), MPa1,851
Operating ambient temperature-40°…+45°С-40°…+45°С
Conditional bore, mm2525
Throughput at P but (not less), m3/min7575
Weight (no more than), kg0,80,5
Input connection1” - NPT1 1/4” - NPT
Output connection-1” - NPT
Reliability indicators: – mean time between failures (not less); - average service life (not less), years 1000 cycles; 12-
Key size, mm5546
Screwing force moment, N∙m260±50350±70
The safety valve is designed for installation on tanks for liquefied hydrocarbon gases (LPG) to ensure that the gas pressure in the tank does not exceed the maximum allowable value. The safety valve can be installed directly on the container or through a check valve. The check valve makes it possible to replace the safety valve when the tank is full.

Filling Valve KN3

SpecificationsMeaning
Working medium Hydrocarbon liquefied fuel gas for municipal household consumption in accordance with GOST 20448-2018
Maximum gas working pressure2,5 МPа
Regulated throughput of the valve at a pressure of 0.1 MPamin 33.5 l/min
Operating ambient temperature-40°…+45°С
Operating ambient temperatureК 1 1/4'' GOST6111
Outlet thread1 3/4 - 6 ACME 2G outer
WeightNot more than 0,55 кg
Reliability indicator – time between failuresAt least 5000 cycles
Average service lifeAt least 12 years
Moment of force of screwing the valve into the neck of the container(350±40) Nm
Wrench size46 mm
Filling valve KN3 TU 28.14.11-250-95158436-2021 is designed for installation on tanks for liquefied hydrocarbon gases in accordance with GOST 15860-84 and is their filling device. Climatic version — U2 GOST 15150-69 (during operation in working condition, the lower value of the ambient air temperature is minus 40°C)

Liquid Withdrawal Valve KZHF1

SpecificationsMeaning
Working medium Hydrocarbon liquefied fuel gas for municipal household consumption in accordance with GOST 20448-2018
Maximum gas working pressure2,5 МPа
Working ambient temperature-40°…+45°С
Connection thread with tankK 3/4'' GOST6111
Outlet threadK 3/4'' GOST6111 internal
WeightNot more than 0,75 кg
Reliability indicator – time between failuresAt least 5000 cycles
Average service lifeAt least 12 years
Moment of force of screwing the valve into the neck of the container(220±40) Nm
Wrench size32 mm
KZhF1 valve TU 28.14.11-250-95158436-2021 is designed for installation on tanks for liquefied hydrocarbon gases in accordance with GOST 15860-84 and is used to withdraw the LPG liquid phase. Climatic version — U2 GOST 15150-69 (during operation in working condition, the lower value of the ambient air temperature is — 40°C)

Drain Valve KS1

SpecificationsMeaning
Working medium Hydrocarbon liquefied fuel gas for municipal household consumption in accordance with GOST 20448-2018
Maximum gas working pressure2.5 MPa
Operating ambient temperature-40°…+45°С
Connection thread with tankK 3/4'' GOST6111
Outlet threadK3/4'' GOST6111 internal
Weightnot more than 0,35 кg
Reliability indicator – time between failuresat least 5000 cycles
Average service lifeat least 12 years
Moment of force of screwing the valve into the neck of the container(220±40) Nm
Wrench size36 mm
The drain valve KS1 TU 28.14.11-250-95158436-2021 is designed for installation on tanks for liquefied hydrocarbon gases in accordance with GOST 15860-84 and is used to drain the liquid phase of LPG and with extraneous contaminants. Climatic version — U2 GOST 15150-69 (during operation in working condition, the lower value of the ambient air temperature is minus 40 °C)

Pressure Relief Valve type KP2

SpecificationsMeaning
Working medium Hydrocarbon liquefied fuel gas for municipal household consumption in accordance with GOST 20448-2018
Pressure of the beginning of opening of the safety valve (РНО), barNo more than 16.67
Safety valve setting pressure (RN), barNot less than 15.65
Full opening pressure (RPO)bar 17.65
Capacity (G) at full valve opening (RPO)not less than 71 m3/min
Operating ambient temperature-40°…+45°С
Connection thread with tankК 1'' GOST6111
Weightnot more than 0,85 кg
Reliability indicator – time between failuresat least 100 cycles
Average service lifeat least 12 years
Moment of force of screwing the valve into the neck of the container(220±40) Nm
Wrench size44 mm
The pressure relief valve KP2 TU 28.14.11-250/1-95158436-2021 is designed for installation on tanks for liquefied hydrocarbon gases in accordance with GOST 15860-84 to ensure that the LPG pressure in the tank does not exceed the allowable value. Climatic version — U2 GOST 15150-69 (during operation in working condition, the lower value of the ambient air temperature is minus 40°C)

Pressure Relief Valve KP1

SpecificationsMeaning
Working medium Hydrocarbon liquefied fuel gas for municipal household consumption in accordance with GOST 20448-2018
Pressure of the beginning of opening of the safety valve (РНО), barNo more than 16.67
Safety valve setting pressure (RN), barNo more than 16.67
Full opening pressure (RPO)bar 17.65
Capacity (G) at full valve opening (RPO)Not less than 39 m3/min
Operating ambient temperature-40°…+45°С
Connection thread with tankK 3/4'' GOST6111
WeightNot more than 0,55 кg
Reliability indicator – time between failuresAt least 100 cycles
Average service lifeAt least 12 years
Moment of force of screwing the valve into the neck of the container(220±40) Nm
Wrench size44 mm
The pressure relief valve KP1 TU 28.14.11-250/1-95158436-2021 is designed for installation on tanks for liquefied hydrocarbon gases in accordance with GOST 15860-84 to ensure that the LPG pressure in the tank does not exceed the allowable value. Climatic version — U2 GOST 15150-69 (during operation in working condition, the lower value of the ambient air temperature is minus 40°C)

Mini-tank for LPG storage tanks

ModelV total (l)V useful (l)L (mm)Н (mm)А (mm)В (mm)Weight (kg)
BGZH 480/608-16Г 4804081810175100150131,5±8
BGZH 600/810-16Г600510135023550100166±13
BGZH 850/810-16Г8507201820235100150216±17
Mini-tank for LPG storage is a low-cost solution for heating of your country-house. The mini-tank is supplied with high-quality shut-off valves manufactured in Italy that secure its safe operation. Technical data on the Mini-tank for LPG storage:
  • Working environment – liquefied gas (propane, butane);
  • Working pressure 1,6 МPа (16,0 kgf/cm2);
  • Testing pressure 2,5 МPа (25,0 kgf/cm2);
  • Burst pressure of at least 5,0 МPа (50,0 kgf/cm2).
Design, testing, acceptance, marking, transport and storage in compliance with ПБ 03-576-03. Mini-tank for gas storage with the capacity of 480-900 litres is aimed for storage of liquefied gas. It will help you facilitate the autonomy of your country house for quite a long period. Mini-tank advantages:
  • Low cost of equipment and installation.
  • Doesn`t require costly excavation procedures.
  • Volume in 500-liter tank is equivalent to 10 50-liter LPG bottles. Filling with LPG truck-carrier.
  • Mini-tank (up to 600 l) installation next to wall of dwelling. (according to p.8.2.3 of regulations code for gas distribution systems СП13330.2011).
  • Possible mounting of mini-tank for LPG storage (volume up to 600 l) on trailer for autonomous filling at gas-filling station (as per “European Agreement concerning the International Carriage of Dangerous Goods by Road” it doesn`t require additional permits).
Equipment name
No.
Model
Equipment features
Coupling dimensions  (to tank)
Coupling dimensions (to system)
Liquid withdrawal valve
1
VL13
3/4” – 14 NPT
3/4” – 14 NPT (plugged)
Multiservice valve with pressure gauge
2
GS80-P
3/4” – 14 NPT
885” – 14 NGO-LH-INT
Filler valve
3
VRN 20
1” ¼ – 11.5 NPT
1” ¾-6 ACME 2G
Float gauge
4
2069.U
flange
Pressure relief valve (17,32 bar)
5
PRV 1128
3/4″ – 14 NPT
Optional:  Pressure regulator 10 kg/h (22-50 mBar) with adapter
 
524AC
internal 1/4″ NPT
internal 1/2″ NPT
Traditionally the large-size LPG storage tanks (of 2 000 litres and more) imply considerable prices that cannot be afforded by average owners of country houses, as well as costly underground installation. In these terms a mini-tank is an attractive option. Firstly, such a container involves a lot more viable capital expenditures. Secondly, when buying our mini-tank for gas storage you get rid of daily gas filling. Thus, the offered LPG storage tank volume facilitates from 2 weeks to 2-months of trouble-free heating (consumpion depends on the square footage of your house). Certificates and warranty: Mini-tank for LPG torage is certified in accordance with the standards of the Customs Union. Warranty period is  18 months. Service life is 24 years.

Oxygen valve type VKB-20

SpecificationsMeaning
Operating environmentOxygen
Outlet pressure not more than20 МPa
Mass gas flow rate, m 3/h, not less than50
Operating ambient temperature -50°…+60°С
Nominal thread diameter of attachment to tank W27,8
Body outlet fitting thread G3/4''-А ГОСТ 6357
Weight, not more than0,7 kg
Reliability rate: time to failure, not less than 3000 cycles
Average useful life, not less than6 years
The oxygen cylinder valve VKB-20 is designed for installation on oxygen cylinders with a working pressure of ≤20 MPa (200 kgf / cm2) and is a shut-off device during filling, storage and consumption of oxygen. It is allowed to use VKB-20 valves for installation on cylinders of neutral (compressed air, nitrogen) and inert (argon, helium) gases, subject to prior change of color of the flywheel.

Underground LPG storage tanks

Tank designationCapacity, lOverall length L, mmShell length, L1, mmOuter diameter Dn, mmHeight H, mmMetal thickness S, mmWeight m±100, kg
BGZH 2200/1200-1622002155±151480445÷515
BGZH 2700/1200-1627002600±151925510÷595
BGZH 3100/1200-1631002900±202220555÷648
BGZH 3900/1200-1639003640±202960665÷780
BGZH 4800/1200-1648004380±253700775÷910
BGZH 5600/1200-1656005120±2544001212±61960±505,0-6,0885÷1045
BGZH 6400/1200-1664005860±3051801000÷1180
BGZH 6600/1200-1666006050±3053701030÷1215
BGZH 7300/1200-1673006600±3044151110÷1310
BGZH 8100/1200-1681007340±3559201220÷1445
BGZH 8950/1200-1689508080±3566601335÷1580
BGZH 9800/1200-1698008820±4574001440÷1710
BGZH 10000/1200-16100009560±4581401550÷1840
Standard equipment of BGZH gas tanks…-1200/16
№ 
Name
Model
Equipment characteristics
Connecting size (to the tank)
Connecting dimension (to the system)
1
Filling valve
VRN20
К 1 1/4”-11,5  NPT (К 1 1/4” ГОСТ6111-52)
К 1 3/4” ACME
2
Liquid phase valve with plug
RRL16
К 3/4” -14 NPT (К 3/4” ГОСТ6111-52)
К 3/4” -14 NPT (К 3/4” ГОСТ6111-52
3
Underground vapor phase valve
GS-80P
К 3/4” -14 NPT (К 3/4” ГОСТ6111-52)
К 3/4” -14 NPT (К 3/4” ГОСТ6111-52
4
Safety valve (operating setting 15.6 bar)
PRV 1410
1”-11.5 NPT
5
Float level gauge
Flange
Advantages of gas tanks LLC “Balcity”
  • containers are certified;
  • containers are produced on modern Italian equipment;
  • shut-off valves of the reputable Italian company CAVAGNA Group are installed on the tank;
  • 100% radiographic control of welded joints;
  • thickness of steel 09G2S (5-6 mm) corresponds to GOST 34233.1-GOST 34233.1-2;
  • anti-corrosion coating.